Robostreet Flow: A Lightweight, Ultra-Low-Drag Electric Tractor and Four-Truck Hybrid Convoy Architecture for Minimum-Cost Point-to-Point Freight
This paper presents Robostreet Flow, a freight architecture that jointly optimizes the vehicle, convoy formation, and operating model to reduce cost per ton-mile by 56%. The platform uses a battery-electric 6x4 tractor with drag coefficient 0.35, carbon-composite monocoque reducing weight by 50%, and a four-truck convoy where three followers operate at SAE Level 4 autonomy. Close following at 8m gap reduces follower drag by 42-48%, and fleet-average energy consumption is 1.27 kWh/mi, 20.5% lower than an isolated vehicle.
-->
[Submitted on 28 Jul 2026]
Title:Robostreet Flow: A Lightweight, Ultra-Low-Drag Electric Tractor and Four-Truck Hybrid Convoy Architecture for Minimum-Cost Point-to-Point Freight
View a PDF of the paper titled Robostreet Flow: A Lightweight, Ultra-Low-Drag Electric Tractor and Four-Truck Hybrid Convoy Architecture for Minimum-Cost Point-to-Point Freight, by Wei Wang and 4 other authors
View PDF
Abstract:Line-haul trucking costs are dominated by three comparably sized components: energy, driver labor, and equipment. Most efficiency technologies address only one component at a time. This paper presents Robostreet Flow, a freight architecture that jointly optimizes the vehicle, convoy formation, and operating model to minimize cost per ton-mile on high-volume point-to-point corridors. The Flow platform is a battery-electric 6x4 tractor with a teardrop single-seat cab and a drag coefficient of 0.35, approximately 40% below that of conventional Class 8 tractors. A carbon-composite monocoque and structurally integrated batteries reduce net vehicle weight by 50%. A 513 kWh tractor battery and a 340 kWh powered trailer battery provide a 500-mile single-charge range. Four Flow trucks operate as a coordinated convoy with a safety driver only in the lead vehicle, while three followers operate in SAE Level 4 automated mode. Computational fluid dynamics simulations show that close following at an 8 m gap reduces follower drag coefficients by 42-48% and follower peak frontal pressure by approximately a factor of four relative to the exposed lead vehicle. A longitudinal energy model calibrated to these results predicts fleet-average consumption of 1.27 kWh/mi in convoy, compared with 1.60 kWh/mi for an isolated vehicle, for a 20.5% energy saving. Electricity cost is approximately 17% of the equivalent diesel fuel cost. Amortizing one driver across four trucks and accounting for the additional payload enabled by lightweighting reduce operating cost from 9.4 to 4.1 cents per ton-mile, a 56% reduction relative to a diesel baseline. Sensitivity analysis, a hub-to-hub operating concept, and regulatory implications are also presented.
Comments: 10 pages, 6 figures. Submitted to IEEE Transactions on Intelligent Transportation Systems 2026
Subjects:
Computation and Language (cs.CL)
ACM classes: I.2.9
Cite as: arXiv:2607.26250 [cs.CL]
(or arXiv:2607.26250v1 [cs.CL] for this version)
https://doi.org/10.48550/arXiv.2607.26250
arXiv-issued DOI via DataCite (pending registration)
Journal reference: IEEE TRANSACTIONS ON INTELLIGENT TRANSPORTATION SYSTEMS 2026
Submission history
From: Wei Wang [view email] [v1] Tue, 28 Jul 2026 20:33:08 UTC (805 KB)
Full-text links:
Access Paper:
View a PDF of the paper titled Robostreet Flow: A Lightweight, Ultra-Low-Drag Electric Tractor and Four-Truck Hybrid Convoy Architecture for Minimum-Cost Point-to-Point Freight, by Wei Wang and 4 other authors
View PDF
view license
Current browse context:
cs.CL
new | recent | 2026-07
Change to browse by:
cs
References & Citations
NASA ADS
Google Scholar
Semantic Scholar
Loading...
Data provided by:
Bibliographic Tools
Bibliographic and Citation Tools
Bibliographic Explorer Toggle
Bibliographic Explorer (What is the Explorer?)
Connected Papers Toggle
Connected Papers (What is Connected Papers?)
Litmaps Toggle
Litmaps (What is Litmaps?)
scite.ai Toggle
scite Smart Citations (What are Smart Citations?)
Code, Data, Media
Code, Data and Media Associated with this Article
alphaXiv Toggle
alphaXiv (What is alphaXiv?)
Links to Code Toggle
CatalyzeX Code Finder for Papers (What is CatalyzeX?)
DagsHub Toggle
DagsHub (What is DagsHub?)
GotitPub Toggle
Gotit.pub (What is GotitPub?)
Huggingface Toggle
Hugging Face (What is Huggingface?)
ScienceCast Toggle
ScienceCast (What is ScienceCast?)
Demos
Demos
Replicate Toggle
Replicate (What is Replicate?)
Spaces Toggle
Hugging Face Spaces (What is Spaces?)
Spaces Toggle
TXYZ.AI (What is TXYZ.AI?)
Related Papers
Recommenders and Search Tools
Link to Influence Flower
Influence Flower (What are Influence Flowers?)
Core recommender toggle
CORE Recommender (What is CORE?)
Author
Venue
Institution
Topic
About arXivLabs
arXivLabs: experimental projects with community collaborators
arXivLabs is a framework that allows collaborators to develop and share new arXiv features directly on our website.
Both individuals and organizations that work with arXivLabs have embraced and accepted our values of openness, community, excellence, and user data privacy. arXiv is committed to these values and only works with partners that adhere to them.
Have an idea for a project that will add value for arXiv's community? Learn more about arXivLabs.
Which authors of this paper are endorsers? | Disable MathJax (What is MathJax?)